Atto Quark Superstretch 4" Frame


The 4" Atto Quark Superstretch is a lightweight weapon for tight and indoor tracks. With an typical all up weight of  around 160g it's a super light and strong racing frame that's just as happy at your local bando.


The new Aero canopy follows the same design principkles as it's bigger brother the photon and handles just as well due to the same superstrech geometry. The canopy includes a fin for turtle mode as well as built in aero protection for your motor wires resulting in a very clean build


With 3mm chamfered base plate and tough TPU canopy, the quark is ltough enough to take a hit but super light and responsive on the track.


The Quark is supplied with the aero canopy plus the optional carbon top plate, stainless steel Torx frame bolts, 25mm standoffs, and Atto 20mm PDB, printed micro camera and whip antenna mounts plus a carbon prop spanner.


The Quark is was developed specifically for a 20mm flight controller and 19mm micro csmeras. The included Atto 20mm PDB gives you the option to build for any voltage while the smaller components allow a thinner frame and lower standoffs to be used, reducing drag and weight whilst increasing strength.


The Quark accepts any motors from 1103 to 1707. We recommend a 1408 motor paired with 20A ESCS. Most small ESCS will fit on the the arms if required. Unlike the 3" Quark, an SMA mount version is avaiable for use with stubby antennas .


Quark frame kit includes:


3mm Chamfered base plate

2mm Chamfered top plate

3D Printed TPU Aero canopy

3 x 25mm aluminium standoffs

3x 5mm aluminium standoffs

6 x 6mm Stainless steel M3 torx bolts

3 x 12mm Stainless steel M3 torx bolts

M5 Spanner / keyring

ATTO 20mm Power Distribution Board

TPU mcro camera mount

TPU Whip antenna mount


*TPU Canopy colour may vary. Get in touch if you require a specific print.

Antenna option

    (+44) 7886 326 623

    ©2019 Atto.